High school CTE robotics, 2027

Medical Robotics

Medical Robotics is our 2027 high school robotics course: 45 lessons for grades 8 to 12. Your students learn how the human body works, then build and code robots that help it, from a prosthetic arm to a surgical gripper.

A gray FlexForge prosthetic arm with gears and a gripper hand stands on a wooden table, wired to a white robot controller and a battery
A prosthetic arm built from CTE Kit pieces.

Our high school medical robotics curriculum

Every lesson pairs a life science focus with hands-on robotics. Teams of two or three share one True Robotics CTE Kit, program it in True Robotics Playground, design custom parts in CAD, and keep a Design History File just like a real medical device team. Your teachers get a full lesson plan and slides with embedded videos for every lesson. It is hands-on, real-world STEM that shows your students where biology, engineering, and coding meet in a career.

2027

Our 2027 course

Medical Robotics is our 2027 course on the True Robotics CTE Kit, $850 per kit with a lead time of 6 to 8 weeks. If you are planning a high school CTE, engineering, or health science pathway, our team would love to hear about it.

Talk to our team

A 45-lesson course for grades 8 to 12, aligned to NGSS, CSTA, the Massachusetts STE Framework, and your state's standards.

See how Medical Robotics lines up with standards
Medical Robotics at a glance
Medical Robotics at a glance
Grades8 to 12
Lessons45 lessons of 45 to 60 minutes
UnitsFive medical devices and a capstone
Teams2 to 3 students per kit
Robot kitTrue Robotics CTE Kit
CodingTrue Robotics Playground, in blocks or Python
3D printerOptional
StandardsAligned to every state
Course year2027

Before high school, your 6th, 7th, and 8th graders can build our Axle Robot Kit in Introduction to Robotics with Axle. Students who come from Axle wire and program faster in Medical Robotics.

What your students will build

After two lessons on safety and the kit, every unit is built around one medical device, one patient, and a test clinicians actually use, and the course ends with each team designing a medical robot of its own.

A gray FlexForge prosthetic arm with gears and a gripper hand stands on a wooden table, wired to a white robot controller and a battery
A prosthetic arm built from CTE Kit pieces. Students build their own in Unit 1.
  1. Powered Prosthetic Arm

    For someone who lost an arm above the elbow.

    A geared elbow and a servo claw, driven from the game controller, with custom claw tips.

    Official test: the Box and Block Test therapists use, counting blocks moved in 60 seconds.

  2. Steady Spoon

    For someone who can't keep a spoon level because of tremor, a stroke, or a spinal cord injury.

    A handheld spoon that uses the gyro and a servo to stay level, with a custom handle grip.

    Official test: a tilt course, counting beads delivered out of 10.

  3. Rehab Exoskeleton

    For someone rebuilding arm strength after a stroke.

    An elbow exoskeleton on a model arm with therapy and assist modes, an emergency stop, and a custom forearm cuff.

    Official test: a 10 rep therapy session and a 5 second lift.

  4. Hospital Delivery Robot

    For nurses and patients on a busy hospital floor.

    A line following robot that stops for people and checks the patient's wristband before it unlocks the medicine, with a custom cup holder.

    Official test: a three room delivery with one wrong wristband to refuse.

  5. Teleoperated Surgical Gripper

    For a surgeon doing minimally invasive surgery.

    A two joint gripper arm with a precision mode for delicate work and custom grasper tips.

    Official test: a timed peg transfer using only the screen view.

  6. Capstone: Your Own Medical Robot

    For a real patient need each team chooses.

    Each team's own robot from the CTE Kit, with at least one custom part, taken from a patient need to a tested prototype.

    Final test: a usability test with a classmate as the patient, then a showcase for guests from health care.

Every lesson

Every lesson is written for a 60 minute class, and every lesson plan includes a 45 minute version. Each one has an entrance ticket, a mini-lesson, 25 to 35 minutes of hands-on work time, time to log data in the Engineering Journal and clean up, and a reflection. On build, programming, testing, and Show and Tell lessons, the opening becomes one short patient story, so teams get even more time with their kits.

Your teachers get a lesson plan with timed activities, slides with embedded videos, and an Engineering Journal page for every lesson, with answer keys where they are needed and starter programs in blocks and Python for the coding lessons, so they can teach it with confidence from day one.

Safety comes first: every student passes a safety quiz before using tools, safety glasses go on for every build, and body data like heart rate is recorded by team number, never by name. Fewer class periods? Our team will work with you on a plan that keeps the devices that matter most for your program.

Every unit

Every device runs through the same design cycle, so your students always know what each lesson is for.

  1. Plan and Design. Criteria from the patient's needs, two sketches, a decision matrix, a cost estimate, and the team's custom part started in CAD.
  2. Build. The device comes together from the kit, and every joint is checked by hand before any code goes on.
  3. Program. Teams write the program, map the controls, and run the first full test.
  4. Test and Improve. The custom part goes on, then three mechanism trials and three code trials, one variable at a time.
  5. Show and Tell. The official test, then stations where teammates split the Clinical, Build, Program, and Data roles.

Built for high school CTE

Programming

Students program every device in True Robotics Playground. Grades 8 and 9 usually code in blocks, and grades 10 to 12 can move to Python. Skills grow from loops and servo angles to closed-loop control, state machines, and motion scaling. Every starter program comes in both, and teams are placed by readiness rather than grade, so a team can switch to Python whenever it is ready.

Design and 3D printing

In every unit, teams design one custom part for their device in our free True Robotics Design Playground, CAD software that runs right in a web browser, from claw tips for the arm to grasper tips for the surgical gripper. A 3D printer is a bonus, not a requirement: schools with one print each part, and schools without one build the same idea from kit pieces, so the design work counts either way. Open the CAD Playground

In the kit

The True Robotics CTE Kit: a robot controller with a battery, a game controller, motors, servos, a gyro, a light sensor, a camera, an ultrasonic sensor, cables, omni and traction wheels, and FlexForge Enhanced Kit parts, plus a 3D printing guide. See the CTE Kit

Standards

Mapped lesson by lesson to the Massachusetts Science and Technology/Engineering (STE) Curriculum Framework (2016) and the CSTA K-12 Computer Science Standards (2017): 3 life science, 1 physical science, 11 engineering, and 7 computer science standards. We publish an alignment to your own state’s standards for every state, too. Find your state’s alignment

How students are assessed

Students show what they know through an initial and a final benchmark, a short unit check after each unit, hands-on skills checks, and an official test and Show and Tell rubric for every device. The capstone ends with a Design History File and a presentation scored by a panel of guests.

Careers

  • Biomedical engineering
  • Prosthetics
  • Rehabilitation engineering
  • Physical and occupational therapy
  • Clinical engineering
  • Surgical robotics

Questions about Medical Robotics

What is the True Robotics Medical Robotics course?

Medical Robotics is our 2027 robotics course for grades 8 to 12, with 45 lessons. Students learn how the human body works, then design, build, and program robots that help it: a powered prosthetic arm, a steady spoon, a rehab exoskeleton, a hospital delivery robot, a surgical gripper, and a medical robot of their own. Every lesson pairs a life science focus with hands-on robotics. Teams of two or three share one True Robotics CTE Kit.

How long does it take to get the CTE Kit for Medical Robotics?

The lead time on the True Robotics CTE Kit is 6 to 8 weeks. Medical Robotics is our 2027 course, and teams of two or three share one kit. If your school is planning a high school CTE, engineering, or health science pathway, get in touch with our team and we will help you plan your timing!

What do students build in Medical Robotics?

Your students build five medical devices and then one of their own: a powered prosthetic arm, a steady spoon that stays level for someone with a tremor, a rehab exoskeleton for an elbow, a hospital delivery robot that checks patient wristbands, and a teleoperated surgical gripper. Each device starts with a patient and ends with a test clinicians actually use, like the Box and Block Test for the arm. In the capstone, each team designs, builds, and tests a medical robot for a real patient need and presents it to guests from health care.

Does True Robotics have robotics programs for high school?

Yes. Medical Robotics, our 2027 course for grades 8 to 12, has 45 lessons and runs on the True Robotics CTE Kit. Our K-12 Classroom Suite serves your students from kindergarten through middle school with Treads, Pilot, and Axle, and Medical Robotics on our CTE Kit carries it through grade 12.

Is Medical Robotics a CTE course?

Yes. Medical Robotics is the first course in our career and technical education (CTE) line for grades 8 to 12, and our 2027 course. It connects hands-on robotics to real careers in biomedical engineering, prosthetics, rehabilitation engineering, physical and occupational therapy, clinical engineering, and surgical robotics. Along the way, students rate risks and keep a Design History File just like a medical device team, and in the capstone they present their own robot to guests from local hospitals, colleges, or companies.

What does a Medical Robotics lesson look like?

Every lesson is written for a 60 minute class, and every lesson plan includes a 45 minute version. Each one has an entrance ticket, a mini-lesson, 25 to 35 minutes of hands-on work time, time to log data in the Engineering Journal and clean up, and a reflection. Your teachers get a lesson plan with timed activities, slides with embedded videos, and an Engineering Journal page for every lesson, with answer keys where they are needed and starter programs in blocks and Python for the coding lessons. Every device runs through the same design cycle: Plan and Design, Build, Program, Test and Improve, and Show and Tell.

Do Medical Robotics students code in blocks or Python?

Both. Students in Medical Robotics program every device in True Robotics Playground, where grades 8 and 9 usually code in blocks and grades 10 to 12 can move to Python. Every starter program comes in both, and teams are placed by readiness rather than grade, so a team can switch to Python whenever it is ready. Their skills grow from loops and servo angles to closed-loop control, state machines, and motion scaling.

Do we need a 3D printer for Medical Robotics?

No. Every build in Medical Robotics works with the pieces in the True Robotics CTE Kit, so a 3D printer is a bonus, not a requirement. In every unit, teams design one custom part for their device in our free True Robotics Design Playground, CAD software that runs right in a web browser at design.truerobotics.org. Schools with a printer print it using the guide that comes with the kit, and schools without one build the same idea from kit pieces, so the design work counts either way.

What standards does Medical Robotics align to?

Medical Robotics is mapped lesson by lesson to the Massachusetts Science and Technology/Engineering (STE) Curriculum Framework (2016) and the CSTA K-12 Computer Science Standards (2017): 3 life science, 1 physical science, 11 engineering, and 7 computer science standards. We also publish a Medical Robotics standards alignment for every state, with your state's own codes and wording, on our Standards Alignment page. Every standard listed is one the lessons teach directly, and our team is happy to talk through how the course fits your school's science, engineering, and CTE goals.

Bring Medical Robotics to your high school

Medical Robotics is our 2027 course for grades 8 to 12. Tell us about your students and your CTE, engineering, or health science goals, and our team will help you plan your program. Interested in being one of our first schools? Get in touch with our team!